{"id":4291,"date":"2020-08-23T12:23:23","date_gmt":"2020-08-23T06:53:23","guid":{"rendered":"https:\/\/zeeelectronics.in\/appmb\/?post_type=product&p=4291"},"modified":"2025-01-05T17:34:42","modified_gmt":"2025-01-05T12:04:42","slug":"w1209-digital-thermometer-thermo-controller-switch-module","status":"publish","type":"product","link":"https:\/\/zeeelectronics.in\/appmb\/product\/w1209-digital-thermometer-thermo-controller-switch-module\/","title":{"rendered":"W1209 Digital Thermometer Thermo Controller Switch Module"},"content":{"rendered":"

Connect the required power supply and equipment, to the controller power supply, as measured temperature is displayed, press the SET button, the display temperature flashes, press “+” “-” to set the desired temperature(hold down the button 5 seconds more quickly lift). After setting press SET to confirm return, then the controller according to the set temperature automatically execute the relay off!<\/span><\/p>\n


\n<\/span>\u00a0Indicator, LED Status Description<\/strong>
\n<\/span>Indicator: indicates relay is closed, Off means the relay has been
\ndisconnected;
\nDigital: Displays the sensor 888 is open, follow the instructions to connect the sensor;
\n<\/span>Show HHH <\/strong>for the excess of the maximum temperature of the measuring range, the thermostat will be forced off the relay;
\nDisplay L L L<\/strong> of the measuring range of the lowest temperature, the thermostat will be forced off the relay;
\nDisplay – – – <\/strong>high temperature alarm, thermostat will forcibly disconnect relay
\n<\/span>
\n\u00a0Parameter Function<\/strong><\/span><\/p>\n

Press SET button for 5 seconds to enter the main menu settings, press
\nthe “+”\u00a0\u00a0 “-” Switching P0-P8, long press SET to confirm or automatically
\n10 seconds after no key operation of the controller to return.<\/span><\/p>\n

P0\u00a0 Cooling, Heating mode<\/strong><\/span><\/p>\n

In the main menu interface P0, press the SET key to enter setup, press”+” “-” to switch to heating mode [H] [C] for the cooling mode, press SET to return, long press SET or 10 seconds without button operation control automatically confirm completion.
\n<\/span>[C] under cooling mode: Measured value \u2265 set point + hysteresis, relay;measured value \u2264 set point, the relay off;
\n[H] Under heating mode: Measured value \u2264 set point – hysteresis, relay;measured value \u2265 set point, the relay off;
\n<\/span>
\nP1 Hysteresis setting<\/strong><\/span><\/p>\n

In the main menu interface P1, press the SET button to enter the hysteresis settings, press the “+” “-” to set hysteresis of 0.1 to 30, press SET to return after the completion of a long press SET or 10 seconds without button operation controller automatically confirm completion.Cooling mode: When the measured temperature \u2265 set value + return difference, relay, refrigeration starts; when the temperature measured value \u2264 set value, the relay off, refrigerator off.For example: the environment 30\u00b0C, 25 \u00b0C is set, hysteresis is set to2 \u00b0C , after power relay closed refrigeration starts, when the cooling to
\n25 \u00b0C , the relay off cooling off, this time due to cooler have disconnected the temperature began to rise, when the set value rose to27 \u00b0C (set point + return difference) relay closes when the chiller is started again, and so forth loop between the control temperature 25-27 \u00b0C .Heating mode: when the temperature measured value \u2264 set value – the
\ndifference back, relay, heater start; when the temperature measured value \u2265 set value, the relay is switched off, the heater is turned off.For example: 10 \u00b0C environment for the setting is 25 \u00b0C , hysteresis isset to 2 \u00b0C , after power relay closed the heaters, when heated to<\/span>25 \u00b0C , the relay off the heater turned off, this time because the heater has been disconnect the temperature began to fall, down to the current set point 23 \u00b0C (set-point – return difference), the relay is closed heater
\nstarts again, and so forth cycle to control the temperature between 23-25 \u00b0C .<\/span><\/p>\n

P2 highest temperature setting limit<\/span><\/strong><\/p>\n

To avoid misuse of others led to the set temperature is too high risk, the highest setting of the thermostat capping defining the control thermostat setting range maximum temperature set point.In the main menu interface P2, press the SET key to enter setup, press”+” “-” to set up the set temperature (maximum 110), press SET to return after the completion of a long press SET or 10 seconds without button motion controller automatically confirm completion.For example: P2 is set to 60 \u00b0C , the highest temperature measured only60 \u00b0C , when the temperature rises to 60 \u00b0C , the digital tube displays”H H H”, the relay forcibly disconnected. If you want a higher temperature set point temperature to expand the scope, you need to
\nadjust the upper limit set value.<\/span><\/p>\n

P3 set minimum temperature limit<\/span><\/strong><\/p>\n

To avoid misuse of others lead to the occurrence of ice blocking temperature is too low, the lowest of the thermostat set lower limit function, defining the scope of the thermostat setting controls the minimum temperature set point.
\nIn the main menu interface P3, press the SET key to enter setup, press”+” “-” set the minimum temperature can be set (minimum -50), press SET to return after the completion of a long press SET or 10 seconds without keystroke controller automatically confirm completion.For example: P3 is set to -20 \u00b0C , the lowest temperature of -20 \u00b0C can be measured, when the temperature was lowered to -20 \u00b0C after, LED displays “L L L”, the relay forcibly disconnected. If you want to lower the temperature set point temperature to expand the scope, you need to adjust the setting value lower limit.
\n<\/span>
\nP4 temperature correction<\/span><\/strong><\/p>\n

When the measured temperature and the standard deviation of temperature or because the user hardware has special needs, you can use this function to correct temperature corrected before correction + =temperature correction effective range of -7.0 to 7.0 (unit \u00b0C ).In the main menu interface P4, press the SET key to enter setup, press”+” “-” to set the correction value, press SET to return once completed,long press SET or 10 seconds without button operation controller automatically confirm completion.For example: Normal display 25 degrees; temperature correction is 0:00Show 25 degrees; temperature correction display 26.5 1.5 degrees;temperature correction -1.5 23.5 degrees when displayed.<\/span><\/p>\n

P5 delay start time (unit: seconds)<\/span><\/strong><\/p>\n

When refrigeration or heater work required delay can be turned on delay function to protect the life of the equipment.
\nIn the main menu interface P5, press SET key to enter setup, press “+””-” Setting the delayed start time (unit: seconds), the delay time in the range of 0-600 seconds, press SET to return after the completion of along press SET or 10 seconds without button operation controller automatically confirm completion.Cooling mode: the first power on, if the current temperature \u2265 set value+ return difference when the chiller does not start cooling immediately after the need to run the set delay time to start.Heating mode: the first power on, if the current temperature \u2264 set value -the difference between the time back, the heater does not start heating immediately after the need to run the set delay time to start.Downtime cooler or heater starts between two adjacent delay start time is greater than the set value, cooling starts immediately. Shut down cooling or heater adjacent lapse between two starts is less than the delay start time setting, start again after the need to run chillers complete set delayed start time for the device to start. Delay time is counted down instantly. Delay start is set equal to zero off delay function.For example: cooling mode set the delay to 60 seconds, if the current temperature \u2265 set value + return difference when the thermostat start <\/span>delay after power, after 60 seconds, turn cooler. When you reach the desired temperature of the refrigerant is stopped, then the start time, the next time the cooling starts, if after a time delay set by the cooler work immediately or to wait for the end of the timer to work.<\/span><\/p>\n


\n<\/span><\/em>P6 Buzzer switch (this function is\u00a0 reserved\u00a0 )<\/span><\/strong><\/p>\n


\nP7 temperature alarm function:<\/strong><\/span><\/p>\n

In the main menu interface P7, press SET key to enter setup, press “+””-” to set the high temperature alarm temperature setting range is 0-110 \u00b0C or OFF to turn off this feature (factory default is 50 \u00b0C ). Upon completion press SET to return, long press SET or 10 seconds without button operation controller automatically confirm completion.When the temperature reaches the set value of the high temperature alarm, digital display – – – simultaneously forced off the relay. When setting has been pressing “-” key, the setting value is reduced to 0, then click the “-” key to display “OFF”, at which time the function is off, the high temperature alarm function is invalid.<\/span><\/p>\n

P8 restore factory settings:<\/span><\/strong><\/p>\n

Some man-made causes internal thermostat setting confusion, one by one to set the time-consuming, then use this function to restore the factory settings.<\/span>In the main menu interface P8, press SET key to enter setup,press “+”, “-” is set to [H], press SET to return after the completion of a long press SET or 10 seconds without button operation controller automatically confirm complete recovery factory settings. (Another way: In the off state,while holding down the “+” and “-” button, then on, all of the above parameters back to factory default settings.)<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

Easy to use W1209 DC 12V LED Digital ThermostatTemperature Control Thermometer Thermo
\nController Switch Module with\u00a0 NTC Sensor.<\/p>\n","protected":false},"featured_media":4271,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[30],"product_tag":[217,404,403,39],"class_list":{"0":"post-4291","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-w1209","7":"product_tag-digital","8":"product_tag-incubator","9":"product_tag-thermostat","10":"product_tag-w1209","12":"first","13":"instock","14":"taxable","15":"shipping-taxable","16":"purchasable","17":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/product\/4291","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/comments?post=4291"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/media\/4271"}],"wp:attachment":[{"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/media?parent=4291"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/product_brand?post=4291"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/product_cat?post=4291"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/zeeelectronics.in\/appmb\/wp-json\/wp\/v2\/product_tag?post=4291"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}